For decades, the industrial "winter uniform" followed a predictable, if frustrating, script: a sea of bulky, oversized parkas that made every worker look like they were wearing a sleeping bag. The "unisex" label was a polite way of saying "men’s large," leaving women and workers with diverse body types to roll up sleeves, trip over hems, and hope for the best.
That era officially ended in January 2025.
OSHA’s significant update to the PPE standard (29 CFR 1926.95) shifted the responsibility from simply providing gear to ensuring that gear properly fits each individual worker. As we navigate the tail end of the 2026 winter season, it’s clear that "fit" is no longer a luxury - it’s a legal mandate.
The 2025 OSHA update was a direct response to a glaring safety gap. Historically, PPE was designed around the proportions of a "standard" male frame. For the 14% of the construction workforce that is female, or for workers who are significantly smaller or larger than average, this created a choice between being unprotected or being endangered by their own gear.
Gender-Specific Procurement: Employers must offer PPE that accounts for different anatomical needs (e.g., tailored waists in parkas, narrower glove palms).
Diverse Sizing: A full range of sizes, from XS to 5XL, must be accessible - not just "ordered on request."
Pregnancy Accommodations: The rule explicitly recognizes that body types change, and PPE must adapt to those changes to maintain safety throughout a worker's tenure.
Ill-fitting winter gear isn’t just uncomfortable; it’s a catalyst for accidents. When temperatures drop, the risks of "caught-in" hazards and reduced dexterity skyrocket.
Oversized sleeves on a heavy winter parka are more than just a nuisance. Excess fabric can easily snag on rotating machinery, scaffolding, or power tools. In a high-risk environment, that extra two inches of nylon is a liability that can lead to severe "caught-in" or "struck-by" injuries.
Winter gloves are notoriously bulky. If a glove is too large, the fingertips become "dead space," making it nearly impossible to handle small fasteners or operate sensitive controls. Workers often respond by pulling their gloves off to perform a task - exposing themselves to frostbite - or they struggle through with a compromised grip, leading to tool drops.
Under the current regulations, OSHA inspectors are no longer just checking if a worker has a vest or coat; they are checking if that equipment is selected to ensure it properly fits.
|
Compliance Requirement
|
Action Item for Employers
|
|
Individual Assessment
|
Documented fit-checks for every worker during the onboarding of winter gear.
|
|
Manufacturer Standards
|
Sourcing from vendors that provide "True Fit" or gender-specific lines (e.g., women’s-cut insulated bibs).
|
|
Reporting Mechanism
|
A clear, non-punitive process for workers to report gear that has become unsafe due to wear or fit changes.
|
A common mistake in procurement is "sizing up" - ordering a size larger to accommodate the layers underneath. While it seems logical, this is a recipe for thermal loss and safety violations.
Convection Currents: If a parka is too loose, the "chimney effect" occurs. Warm air generated by the body escapes through the gaps at the waist and neck, while cold air rushes in.
Compressed Insulation: Conversely, gear that is too tight (because you’ve stuffed too many layers underneath) compresses the "loft" of the insulation, stripping it of its ability to trap heat.
The Solution: Look for gear designed with "layering ease." High-quality industrial outerwear is already patterned to fit over a base and mid-layer while maintaining a streamlined silhouette that stays close to the body.
The "Fit" Revolution is about more than just compliance; it’s about acknowledging that a safe worker is one who can move, feel, and function without being hindered by their equipment. By moving away from the "unisex" myth, we aren't just following a rule - we're building a more inclusive, professional, and ultimately safer jobsite.
goSafe offers a wide variety of Seasonal PPE that is customizable on-site by our Customization Department. Our wide variety of FR Outerwear and Non-FR Outerwear, along with our huge selection of Cold Condition Gloves ensures that you'll be equipped to ward off the cold - and still get the job done. We also maintain a constant, ready-to-ship supply of FR Clothing and Safety Footwear in our 'Core FR' department. For more information on these products or any of our other safety and PPE products, please contact us at sales@gosafe.com.
At goSafe, Safety is our ONLY focus - and we'll partner with you to keep you and your teams safe. We're small enough to handle your local projects, yet large enough to serve national accounts. If safety is your mission, it starts with us.
Watch the video below for more information about goSafe's capabilities.